BUILT JUST FOR YOU BY A PRO

Here at Tiny Pontoon Boats, we custom build aluminum pontoon boat deck corner caps. Our caps have machined 1/4" thick top plates and 1/8" thick sides. All our caps are TIG welded by hand by our best welder to make sure you get the strength and beauty that you're looking for. Our caps offer 3.5" of coverage on either side (width of side plates) and are available for outside angles from 60° to 179°. Our standard style caps are available with two, four, or no mounting holes at all for boats with 3", 3.5", 4", 5", and 6" tall deck edge trim.

Please be aware that turn-around time typically varies between 2-3 weeks as we fit these in between filling boat kit orders. That means that if you need these caps "by this weekend", that won't happen, so bear in mind that you have to be a bit patient. Also, at this time, we are not accepting custom cap orders that are different than the designs we offer here as we just can't fit them into our production schedule. We apologize for the inconvenience.

STANARD DESIGN OUTSIDE CORNER CAPS
$94.99 EACH

Below we offer our full range of outside corner caps. As we offer these with three different mounting hole options, please be sure to select your required angle and trim height from the appropriate drop-down menu below. Our deck caps are built after the order is placed and typically ship just a few days after purchase.

FOUR MOUNTING HOLE OUTSIDE CAPS

TWO MOUNTING HOLE OUTSIDE CAPS

ZERO MOUNTING HOLE OUTSIDE CAPS